26
25
24
22
23
20
21
19
18
18.Headshell - Install cartridge here. When
installing a cartridge, refer to the installation
instructions supplied by the manufacturer of
that cartridge. During installation, attach the
stylus protector to guard the stylus tip from
damage.
Attach wires as follows:
White (L+) Left
Blue (L-) Left channel -
Red (R+) Right
Green (R-) Right channel-
19.Headshell Locking Nut - Attach headshell by
inserting into the front end of the tonearm,
then turn the locking nut clockwise with the
head shell firmly held horizontally.
20.S-Shaped Tone Arm
21.Tone Arm Clamp and Rest - Use this rest for
the tone arm and clamp it in position during
transportation.
22.Tone Arm Lift - This elevates the tone arm above the record surface.
23.Tone Arm Lift Adjust Screw - Controls the amount of lift.
24.Tone Arm Lever - Controls the up and down action of the tone arm lift.
25.Anti-Skate Control - This applies inward force to the tonearm so it doesn't skip
outward across the record due to the centrifugal force of the record spinning.
Cartridge manufacturers usually specify the proper setting of this.
26.Counterweight - Adjustment creates the proper downward pressure of the stylus to
the record. Attach now by sliding the counterweight onto the rear of the tonearm.
Twist it lightly and it will screw onto the rear shaft of the tonearm.
T O N E A R M A S S E M B L Y
4
