DAPAudio Soundmate Active 3 MK-II, Руководство пользователя

Страница: 5 / 14

3
Prevent distortion! Make sure that all components connected to the SoundMate have sufficient
power ratings. Otherwise distortion will be generated because the components are operated at
their limits.
Avoid ground loops! Always be sure to connect the power amps from the SoundMate cabinets
and the mixing console to the same electrical circuit to ensure the same phase!
If system is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your system. Leave
the system switched off until it has reached room temperature.
Repairs, servicing and electric connection must be carried out by a qualified technician.
OPERATING DETERMINATIONS
This system is not designed for permanent operation. Consistent operation breaks will ensure that the
system will serve you for a long time without defects.
If this system is operated in any other way, than the one described in this manual, the product may suffer
damages and the
warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious damage to people and property !