DAPAudio RM-101, Руководство пользователя

Страница: 9 / 12

7
Set Up and Operation
It is always advisable to use a pop filter (not included) when recording vocals, not only to avoid overly
accentuated „S, „P‟ and „B‟ sounds, but also to keep moisture (spit) from the element. It is always a good
idea that the microphone is kept in its case when not in use.
Set all volume and gain controls on your mixer, mic preamp or recording device are at their minimum
settings before connecting the microphone.
Make sure, the phantom power is off!
Once the RM-101 is plugged in, move the channel fader gradually to the 0dB position adjust the input
gain using your channel peak led or VU-meter.
Frequency and polar patterns
Connection Cables
Take care of the connector cables, always holding them by the connectors and avoiding knots and
twists when coiling them: This gives the advantage of increasing their life and reliability, which is always to
your advantage.
Periodically check that your cables are in good condition, that they are correctly wired and that all their
contacts are in good condition: a great number of problems (faulty contacts, ground hum, discharges,
etc.) are caused entirely by using unsuitable or faulty cables.
Headphones
Unbalanced mono 1/4” jack plug Balanced mono 1/4” jack plug