12
37 / 38. FX 2 On/Off
You can press the FX 2 button (
37
) to turn this section
on. When the button is pressed the green LED (
38
)
lights up. It is recommended to s
witch the FX-units off
during announcements.
39. FX 2
You can change the FX value. The range is variable
from 0 – 10.
40. AUX 2
You can change the AUX value. The range is variable
from 0 – 10.
41) Stereo 7-8 and L / mono
42) R
43) Stereo 9-10 and L / mono
44) R
45) Record Send L/R
These connectors carry the MASTER
pre-fader audio signal, which means that
the setting of the master fader doesn’t
affect the level of the audio signal that is
present at the RECORD SEND connectors, which let you connect a CD/MD recorder or TAPE/DAT deck.
The nominal level of -10dBV at this output is suitable for professional use as well as for home recording
purposes.
46) 2 Track Return L/R
47) Mono Output
(controlled by Fader
15
)
48) Aux
49) Main Output L/R
Impedance-balanced outputs for the connection of external gear. The outputs are carried out as stereo
phone-type jacks. Whenever possible use balanced cables. Balanced cabling is the best method for
avoiding problems with interference and humming.
50) Power Amp Inputs L/R
It is also possible to only use the amplifier in the Powermix 1
51) FX 1/2 Footsw
You can connect a Footswitch to this jack. The footswitch makes it easy to switch between singing/playing
with an effect and talking to a croud without changing the effect settings on your mixer. Simply push the
footswitch and you can talk without an effect examp Delay, Hall, etc an instant.
52) Phones
You can connect a pair of headphones with an impedance of 32 - 600 Ohm to this Stereo Phones jack.
Balanced 1
/4” TRS socket, wired as Tip=left, Ring=right and sleeve = ground.
Содержание Powermix 1
Страница 1: ...Powermix 1 ORDERCODE D2221...
Страница 18: ...2004 DapAudio...
