DAPAudio PM-One, Руководство пользователя

Страница: 7 / 12

Ordercode: D6181
PM-One
Talk button
If you use a single PM-One, and Chime mode is active, press this button and wait until the chime
sound passes, and then talk. When Chime mode is inactive, always press this button to talk.
If you use multiple devices and the master/slave switch (04) is set to MASTER position, press this
button to talk. If the master/slave switch (04) is set to SLAVE position and the BUSY LED indicator
blinks, it means that the line is busy and you need to wait until the LED indicator stops blinking.
Backside
Fig. 02
Chime/Priority switch
Move the CHIME switch to ON/OFF positions to activate/deactivate chime sound.
Move the PRIORITY switch to ON position (the PM-One receives the highest priority) or to OFF position
(the priority for the PM-One will be determined by the host).
Master/Slave switch
If you connect multiple devices, and the switch is set to MASTER position, you have priority to speak.
If the switch is set to SLAVE position, you need to wait until the BUSY LED indicator stops blinking.
Microphone RJ45 - OUT
Use this connector to connect the PM-One to another PM’s LINK connector or to the input connector
on the ZPA-6240TU.
Microphone RJ45 - LINK
Use this connector to connect two or more devices. Connect the OUTPUT connector on the master
device to the LINK connector on the slave device, etc.
6