DAPAudio NRG-12SA, Руководство пользователя, Страница: 14 / 24

13
NRG-12SA
Product code: D3657
Setup with an Audio Mixer
You can use the NRG-12SA in a setup with an audio mixer. In this setup you can connect 1 or 2 active
subwoofers NRG-12SA to 2 active full-range speakers (NRG-8A/10A/12A/15A).
To complete the setup, follow the steps below:
Make sure that all devices are switched off.
Connect the active full-range speakers and the active subwoofers. See 4.4.1. Setup with 2 Active
Subwoofers on page 14 and 4.4.2. Setup with 1 Active Subwoofers on page 15.
Set the DSP of the subwoofer(s). See 5.3. DSP Settings on page 18.
Set the DSP of the active full-range speakers to +SUB. Do this step if you use active full-range speakers
from the NRG range.
Connect the active subwoofer(s) to the power supply. See 4.6. Connecting to Power Supply on
page 17.
Connect the rest of the devices to the power supply.
Switch on the audio mixer.
Switch on the active full-range speakers.
Switch on the active subwoofer(s). See 5.2. Switching On/Off on page 18.
Adjust the gain control of the active subwoofer. See 5.6. Adjusting the Gain on page 19.