background image

 

 

 

6 

 

  

 

 

NRG-10 

Product code: D3624 

 

Attention 
This device shall be used only for the purposes it is designed for. 

This device is designed to be used as a passive full-range loudspeaker. It is suitable only for indoor use. 
Any incorrect use may lead to hazardous situations and result in injuries and material damage. 

 

This device is not suitable for households. 

 

This device is not designed for permanent operation. 

 

This device does not contain user-serviceable parts. Unauthorized modifications to the device will 
render the warranty void. Such modifications may result in injuries and material damage. 

 

Attention 
Before each use, examine the device visually for any defects. 

Make sure that: 

 

There are no deformations on the housing. 

 

The power cables are not damaged and do not show any material fatigue. 

 

Attention 
Do not expose the device to conditions that exceed the rated IP class conditions. 

This device is IP20 rated. IP (Ingress Protection) 20 class provides protection against solid objects greater 
than 12 mm, such as fingers, and no protection against harmful ingress of water. 

 

Requirements for the User 

This product may be used by ordinary persons. Maintenance and installation may be carried out by 
ordinary persons. Service shall be carried out only by instructed or skilled persons. Contact your Highlite 
International dealer for more information. 

Instructed persons have been instructed and trained by a skilled person, or are supervised by a skilled 
person, for specific tasks and work activities associated with the installation, service and maintenance of 
this product, so that they can identify risks and take precautions to avoid them. 

Skilled persons have training or experience, which enables them to recognize risks and to avoid hazards 
associated with the installation, service and maintenance of this product. 

Ordinary persons are all persons other than instructed persons and skilled persons. Ordinary persons 
include not only users of the product but also any other persons that may have access to the device or 
who may be in the vicinity of the device. 

 

 

Содержание NRG-10





























Отзывы: