DAPAudio MHS-80S, Руководство пользователя

Страница: 3 / 8

Ordercode: D6546
MHS-80S
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
•
DAP Audio MHS-80S
•
User manual
Safety Instructions
Every person involved with the installation, operation and maintenance of this system has to:
•
be qualified
•
follow the instructions of this manual
Before you initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the system.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the system are not subject to
warranty.
This system contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the system.
•
Never remove warning or informative labels from the unit.
• Never leave any cables lying around.
•
Do not open the device and do not modify the device.
•
Do not set the input signal level higher than required to drive the equipment to full output.
• Avoid flames and do not put close to flammable liquids or gases.
•
Make sure you do not use the wrong kind of cables or defective cables.
• Extreme frequency boosts in connection with a high input signal level may lead to overdriving your
equipment. Should this occur, it is necessary to reduce the input signal level.
•
If system is dropped or struck, disconnect the power supply immediately. Have a qualified engineer
inspect for safety before operating.
2