DAPAudio IPS-PMA, Руководство пользователя

Страница: 7 / 12

5
Rear panel
Fig. 2
11) AC Inlet with integrated fuse holder.
This connector is meant for the connection of the supplied main cord. Connect one end of the
power cord to the connector, the other end to the mains, then turn on the power switch to operate
the unit.
Note: Please make sure that the supply voltage matches the operation voltage before connecting
the unit to mains. Replace the fuse only with a fuse of same specification (T315mA).
12) GND Screw.
This screw offers a separate ground connection. Can be useful in case of grounding problems.
13) DC 24V Input.
Used to connect an external back up power supply of 24Vdc (e.g. Battery) .
14) Outputs.
Use this RCA connectors to connect up to three power amplifiers to your IPS-MPA.
15) Aux 1-3 input
16) EMC 1-2 input
These inputs have priority (just like MIC 1). If the IPS-MPA detects a signal at one of the EMC inputs, it
mutes the normal (non priority) inputs. The EMC inputs starts muting the normal (non priority)
channels at an input level of -10dB and completely shuts off the other channels if the level at the
EMC input reaches 0dB.
17) MIC 2- 5 input