DAPAudio IPS-AS, Руководство пользователя

Страница: 9 / 12

7
Operation
Installation
Remove all packing materials from the IPS-AS. Check that all foam and plastic padding is removed.
Secure the equipment into a 19" rack. Connect all cables.
Connecting Power.
Make sure the mains voltage is correct and is the same as printed on the rear of the amplifier. Damage
caused by connecting the amplifier to improper AC voltage is not covered by any warranty. Unless
otherwise specified when ordered. DAP audio devices shipped to customers are configured as follows:
North America 120VAC/60Hz
Europe 230VAC/50Hz
Asia 220VAC /50Hz/60Hz
Australia 240VAC/50Hz
South America 120VAC/60Hz or 220VAC/50Hz
Japan 100VAC/50Hz
Connecting the device
Beneath an example of a possible setup.
NOTE: Always turn off and disconnect the amplifiers from mains voltage before making any connections.
Fig. 3