Ordercode: D4175 / D4176 / D4177 / D4178/D4179
10
HP-500 / HP-900 / HP-1500 / HP-2100/ HP-3000
D4178: HP-2100
Fig. 09
D4179: HP-3000
Fig. 10
Air exhaust
Do not block the air exhaust as it may cause overheating and/or other serious damage.
IEC power connector IN 230V-50/60Hz
400W/650W/1000W/1300W/1800W
Ground/earth connection
Auto Fuse, 3A, resettable
CH 2, 3-pin XLR connector IN (unbalanced/balanced)
Connect low impedance equipment with balanced/unbalanced line level outputs.
CH 2, Speakon connector OUT
Connect the device to speakers.
Mode switch
With this switch you can choose between the 3 operation modes: bridge, parallel and stereo.
STEREO: 2 inputs (channel 1 and 2) and 2 outputs are used.
PARALLEL: 1 input (channel 1) and 2 outputs are used.
BRIDGE: 1 input (channel 1) and 1 output are used (only use at 8Ohm).
Bridge Speakon connector OUT
Connect the device to speakers in Bridge mode.
CH 1, 3-pin XLR connector IN (unbalanced/balanced)
Connect low impedance equipment with balanced/unbalanced line level outputs.
CH 1, Speakon connector OUT
Connect the device to speakers.
Auto Fuse, 6A, resettable
Auto Fuse, 10A, resettable
Auto Fuse, 15A, resettable
Auto Fuse, 20A, resettable