HM-30
Ordercode: D1380
Maintenance
The DAP Audio HM-30 requires almost no maintenance. However, you should keep the unit clean.
Disconnect the microphone and then wipe the cover with a damp cloth. Do not immerse in liquid. Do
not use alcohol or solvents.
Troubleshooting
DAP Audio HM-30
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
01)
If the device does not operate properly, unplug the device.
02)
Check power from the wall, all cables, connections, etc.
03)
If all of the above appears to be O.K., plug the unit in again.
04)
If nothing happens after 30 seconds, unplug the device.
05)
Return the device to your DAP Audio dealer.
Product Specifications
Model:
DAP Audio HM-30
Type:
Dynamic, moving coil
Frequency response:
40 Hz - 16 kHz (-3 dB)
Polar pattern:
Cardioid
Sensitivity:
1,2 mV/Pa -58 dB –
Max. SPL:
140 dB
Impedance:
220 Ohm
Included:
Stand mount and 3-pin XLR cable
Connections:
3-pin XLR IN
Dimensions:
77 x 68 x 90 mm (LxWxH)
Weight:
0,28 kg
Design and product specifications are subject to change without prior notice.
6
Содержание HM-30
Страница 8: ...2016 DAP Audio...
