DAPAudio EM-193, Руководство по эксплуатации

Страница: 8 / 10

6
6) When you want to alter the settings, you can push A, B or C.
Frequency :
Press and hold the SET-button ( A ) for 2 seconds. The display will show FREQUE .
Now you can change the frequency by using the Down- ( B ) and The Up-button ( C ).
Range is from 790 - 814 MHz (D141579) or 822 - 846 MHz (D145182) in steps from 0.125 MHz.
The MHz-sign on the display keeps flashing.
When you have set the desired frequency press the SET-button again. The display will show STORE.
Sensitivity :
Press and hold the SET-button ( A ) for 2 seconds. The display will show FREQUE.
Press the SET-button again. The display will show SENSIT .
Now you can change the sensitivity by using the Down- ( B ) and The Up-button ( C ).
Range is: -30 dB, -20 dB, -10 dB, 0 dB.
When you have set the desired sensitivity press the SET-button again. The display will show STORE.
Loc :
Press and hold the SET-button ( A ) for 2 seconds. The display will show FREQUE.
Press the SET-button twice. The display will show Loc OFF .
Now you can change Loc OFF to Loc ON by using the Down- ( B ) and The Up-button ( C ).
When you have set the desired sensitivity press the SET-button again. The display will show STORE.
Maintenance
The EM-193 requires almost no maintenance. However, you should keep the unit clean. Set the Mix to OFF,
and then wipe the cover with a damp cloth. Do not immerse in liquid.
Keep connections clean. Make sure connections are thoroughly dry before linking equipment or supplying
electric power.
Troubleshooting
Dap Audio EM-193
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates
properly, do not carry out following steps.
1. If the device does not operate properly, set the switch on the microphone to OFF.
2. Check the batteries, etc.
3. If all of the above appears to be O.K., set the switch to ON.
4. If you are unable to determine the cause of the problem, do not open the microphone, as this may
damage the unit and the warranty will become void.
5. Return the microphone to your Dap Audio dealer.