DAPAudio DS-850D, Руководство по эксплуатации продукта, Страница: 9 / 16

7
Functions
NAMES UND FUNCTIONS
Below is a description of the functions of the controls.
Main Unit
1) Track Buttons: press track buttons 0-9 buttons to select tracks from the CD.
2) OPEN/CLOSE (Open/Close-button): Press this button to open and close the disc holder. The disc
holder cannot be opened during playback, so stop playback before pressing the button.
3) STOP: Stop the CD.
4) PITCH BEND – / + : The CD speed changes when one of the Pitch Bend buttons is pressed. Release the
button to return to the original BPM.
5) PITCH System: If you push this button, you can adjust the pitch with the pitch fader.
6) LCD Display
7) TIME (Time button): Press this button to switch the TIME-Display between the elapsed time and
remaining time. The selected mode is indicated by the ELAPSED, REMAIN and TOTAL REMAIN
indicator on the LCD.
8) SINGLE/CONTINUE: Press this button to switch between the SINGLE and CONTINUOUS play mode.
The selected mode is indicated on the LCD. In SINGLE mode, the unit stops the reading after each
track. In CONTINUOUS mode, the unit reads all tracks and then stops.
9) B. SKIP : Use this button to go back to the beginning of the current track or select a previous track
for playing.
10) +10 (Track + 10 Button): Use the button to skip ahead 10 tracks.
11) F.SKIP : Use this button to skip to the next track.
12) PITCH-Fader: Use this fader to adjust the CD pitch. Slide up to decrease the pitch, slide down to
increase the pitch.
13) Inner Shuttle Wheel : When the wheel is turned during the CD pause, the point at which the sound is
being produced, moves by a number of frames corresponding to the number of clicks. Clockwise moves
the point forward, counterclockwise moves the point backward.
Outer Shuttle Wheel : Use the wheel to select the scanning direction and speed. The disc is scanned in
the forward direction when the shuttle wheel is turned clockwise from the neutral position. To scan in
reverse direction when the shuttle wheel is turned counterclockwise. The scanning speed increases
when the shuttle wheel is turned faster.
14) CUE (Cue-Button): Press the CUE button during playback to return to the position at which playback is
started.
15) PLAY/PAUSE-button: Use this button to start playback. Press once to start playback, twice to set the
pause mode, and thrice to resume playback.
16) REPEAT: Use this button to repeat one track or all tracks of the CD.
17) PROGRAM (Program-button): Press the Program-Button, the player will enter the program mode and
stop the CD playback.
18) LOOP IN ( A ) (Loop-Button): Press this button to set the startpoint of the loop.
19) RELOOP: This button is used to start the last saved loop. To finish the loop, press a LOOP button.
20) LOOP OUT ( B ) (Loop-Button): Press this button to set the endpoint of the loop.
21) Disc Holder: Place the disc in the holder. Press the OPEN/CLOSE-button to open and close the disc
holder.
22) OPEN/CLOSE (Open/Close-button): Press this button to open and close the disc holder. The disc
holder cannot be opened during playback, so stop playback before pressing the button.
23) POWER (Power ON/OFF-Switch): When the POWER-switch is pressed, the POWER turns on.