DAPAudio DCS-6230, Руководство пользователя

Страница: 4 / 12

3
Ordercode: D6580
DCS-6230
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the system.
 Never remove warning or informative labels from the unit.
 Never leave any cables lying around.
 Do not open the device and do not modify the device.
 Do not set the input signal level higher than required to drive the equipment to full output.
 Only use system indoors, avoid contact with water or other liquids.
 Avoid flames and do not put close to flammable liquids or gases.
 Make sure you do not use the wrong kind of cables or defective cables.
 Extreme frequency boosts in connection with a high input signal level may lead to overdriving your
equipment. Should this occur, it is necessary to reduce the input signal level.
 If system is dropped or struck, disconnect the power supply immediately. Have a qualified engineer
inspect for safety before operating.
 If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your system. Leave the
system switched off until it has reached room temperature.
 If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Dap Audio dealer for service.
 Repairs, servicing and electric connection must be carried out by a qualified technician.

Keep this manual for future reference.
 Clean only with dry cloth.
 When making the hole in your ceiling to mount the DCS-6230, make sure there is sufficient clearance
behind the ceiling (no obstructions like A/C channels, power lines etc).
 Take care of your speaker wires, they should be free of damage. Damaged speaker wires might
result in poor sound quality and can damage amplifiers.
 Make sure the ceiling can support the speaker’s weight.
 No main power shall be connected to the loudspeakers; doing so will damage the speaker.
 This device should only be serviced by qualified personnel. If not warranty might be void.
 Use cable of the right gauge, certainly for long runs.
 Use cables with clear color indication and maintain polarity throughout the whole system.
 Avoid loud feedback from microphones, this can damage your speaker.
 Please check the units condition after unpacking. If the outside of the carton box has been
damaged, inform your shipper immediately.
Operating Determinations
If this system is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious injuries and damage of property !