DAPAudio DCL-2, Руководство пользователя

Страница: 10 / 16

8
5. PROG / VOLUME
Press it and turn encoder 4 to select one of 20 different programs, among which No 1, 2 and 3 programs are
preset by factory and cannot be changed.
Press it again and then turn encoder 4 to adjust the volume of the corresponding.
The adjustment range of the volume: Mute - +6 dB
In Mono Comp+ sub or Two band Comp Mode, press PROG / VOL for about 2 seconds to select the level
ratio of the input subwoofer from left and right channels.
The adjustment range of Sub / Left: OFF – 100%, step 10%
The adjustment range of Sub / RCH: OFF – 100%, step 10 %
6. Bypass
First press it to disable the compression. Press it again to resume the function.
7. Crossover / Delay
Press the button and turn encoder 4 to select the sub-menu of Crossover and Delay
In Stereo Mode, only the sub-menus under Delay can be operated, including Millisecond Del meters
Del feet.
In Mono + Sub or Two Brand Mode, the following 2 sub-menus High Pass (HPF) and Low Pass (LPF),
are available to select.
In Two Brand Comp mode another Sub-menu
Phase is added.
Press it again and then turn encoder 4 to edit the value of the corresponding sub-menu.
The adjustment range of High Pass : 20 Hz – 250 Hz, step 5 Hz
The adjustment range of Low Pass : 20 Hz – 250 Hz, step 5 Hz
The adjustment range of Delay : 0 ms – 3.5 ms, step 0.05 ms
0 mm –1201 mm, step 17mm
0 ft – 3.945 ft, step 0.057 ft
The adjustment range of Phase: 0 – 180°
Note: In the case of mono and crossover compression, the crossover frequency of the High pass and the
Low pass is adjusted simultaneously in order to ensure the frequency response.