background image

 

20.        button 

MP3 mode: Use this button for skipping or searching backwards 
Tuner mode: Use this button to select the desired station. Each time this button is pushed in, the AM 
frequency decreases with 9Khz intervals, while the FM frequency decreases with 0,1Mhz. If the button is 
pushed in, longer than 1,5 seconds, the radio frequency will decrease automatically until a station is 
tuned in. 

 
21.         button 

MP3 mode: Use this button for skipping or searching forward. 
Tuner mode: Use this button to select the desired station. If the UP button is pressed for longer than 1.5 
seconds, the AM frequency automatically increases with 9Khz intervals, while the FM frequency 
automatically increases with 0,1Mhz intervals, till the radio is tuned in. To stop the selection manually, 
press the UP button again during automatically tuning.  
 

22. MP3 button 

Pushing this button allows you to enter MP3 mode. 

 
23. Memory button 

Pushing this button .

 

 
24. EQ (M3) button 

MP3 mode: Pushing this button will allow you to select a preset equalizer.

 

Tuner mode: Pushing this button will recall memory preset M3. 
 

25. USB connector 
 
26. SD connector 

 

27. 

 

(M4) button 

MP3 mode: Pushing this button will start playback. Pressing the button again will pause playback. 
Tuner mode: Pushing this button will recall memory preset M4. 
 

28. 

 (M5) button 

MP3 mode: Press this button to stop playback.

 

Tuner mode: Pushing this button will recall memory preset M5. 
Pushing and holding this button for 3 seconds, turns the tuner – USB/SD player on or off. 
 

29.  

Push this button to increase the output level of the tuner – USB/SD player. 

 

 

 

Содержание D6140





















Отзывы: