DAPAudio D1476B, Руководство пользователя

Страница: 9 / 32

8
Order code: D1476B
EDGE EBS-1
Receiver (Front)
Fig. 03
12) LCD display
13) Control
Turn/press this control to select, adjust and
confirm the main menu options.
14) Return button
15) IR sensor
16) Power button
Press and hold down this button for 2 seconds to
switch the device on/off.
Receiver (Back)
Fig. 04
17) Power cable safety eye
18) Ground/lift switch
19) 3-pin XLR AF balanced OUT
20) BNC antenna A connector
21) Mic/line switch
22) AF connector OUT (6,3 mm jack)
23) 12–15 V DC power connector OUT
24) 12–15 V DC power connector IN
25) BNC antenna B connector
Installation
Remove all packing materials from the EDGE EBS-1. Check if all foam and plastic padding is removed.
Secure the equipment into a 19" rack if preferred. Connect the receiver to a power outlet with the
supplied DC power adaptor. Connect all cables. Insert the batteries into the transmitter.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Mounting – Single Receiver
Fig. 05