DAPAudio CS-850S, Руководство пользователя

Страница: 8 / 12

7
Order code: D6588
CS-850S
09) Lift the mounting clamps (04) and rotate them clockwise as shown on Fig. 05 and 06.
Fig. 05 Fig. 06
10) Insert the speaker into the mounting hole. Make sure the flange of the mounting frame (01) is flush on
the ceiling.
11) Use a Phillips 2 screwdriver to turn the quick-turn screws (03) slowly clockwise, as shown on Fig. 07.
The quick-turn screws (03) will release the mounting clamps (04) and they will press the speaker
against the ceiling, securing it into position.
12) Attach the grill (03) to the speaker by pushing it carefully into the bezel (02), as shown on Fig. 08.
Fig. 07 Fig. 08
Speaker Wiring
To achieve maximum performance from the subwoofer, it is recommended to use good quality CL2 or
CL3 rated speaker cable. For distances bigger than 20 m,14-gauge wire must be used. For shorter
distances, 16-gauge or 18-gauge wire is sufficient.
Make sure the cable meets any local or national regulations.
Depending on the desired output, you can choose which wires of the subwoofer to connect to the
speaker cable.
For 70 V speaker systems:
●
red = 50 W, brown = 30 W, yellow = 15 W, green = 5 W, white = 3 W, black = common
For 100 V speaker systems:
●
brown = 50 W, yellow = 30 W, green = 15 W, white = 5 W, black = common
Note: Make sure the speaker connection polarity is correct. Always connect positive to positive and
negative to negative. In order to provide the best possible sound, all speakers in a system need to be
wired with the same polarity. If the connections to one speaker in a system are reversed, this will result in
loss of the low frequencies and will affect the overall performance of the system.