DAPAudio Compact 9.2, Руководство пользователя, Страница: 9 / 16

8
Compact 9.2
Ordercode: D2322
Rear Panel
15. Power adapter connector
This is the remote AC power supply input socket for the Compact 9.2. It is a special three core socket.
only use the supplied DAP audio adapter.
16. Equalizer Section
The microphone channel’s equalizer section allows shaping of the incoming audio signal. The high
and low shelving controls have their frequencies fixed at 12KHz and 80Hz respectively. The mid range
control has a peaking response frequency at 2,5KHz. All 3 bands have up to 6dB cut and boost, with
a center detent for off. Turning an Equalizer control to the right amplifies the frequency range,
turning to the left attenuates the signal. Minor changes to the Equalizer control usually produce the
best results. Try to avoid excessive enhancement of the mid band.
17. Master B XLR balanced out connector
Use these outputs to connect an amplifier with balanced inputs.
18. Master A XLR balanced out connector
Use these outputs to connect an amplifier with balanced inputs.
19. Channel gain control (all RCA inputs)
Channel input levels are determined by their corresponding gain controls. With the gain control you
can adjust the line input-sensitivity, while optimally matching the incoming signals to the mixer’s
internal operation level. The high gain of this mixer is ideal when dealing with very low input levels.
20. Display select switch (all RCA inputs)
This switch allows you to setup a text for each RCA input. If the input is selected the text will be
displayed on the
input display (6) . You are able to assign following text: CD 1, CD 2, TUNER, DVD,
TV/SAT, BEAMER, PC1, PC2, DJ, AREA 2, AUX 1, AUX 2.
21. Channel 5 line input connectors
Use the RCA inputs to connect a line level device.
22. Channel 4 line input connectors
Use the RCA inputs to connect a line level device.
23. Channel 3 line input connectors
Use the RCA inputs to connect a line level device.
24. Channel 2 line input connectors
Use the RCA inputs to connect a line level device.
25. Channel 1 line input connectors
Use the RCA inputs to connect a line level device.