DAPAudio COM41 HANDHELD, Руководство по эксплуатации продукта

Страница: 7 / 16

5
Fig. 2
5. Antenna A
6. Balanced audio output connector (Low Z).
7. ¼” Phone jack audio output connector (Unbalanced High Z).
8. Squelch Control.
Adjust squelch control setting to emphasize either signal quality or system range. This control is
factory preset and normally needs no adjustement. For more info see the section on Adjusting the
squelch threshold on page 7.
9. Power input connector.
Please use the supplied AC adapter only.
10. Antenna B
Fig. 3
11. Grille.
12. Low battery LED.
The LED will light red when the battery only has one hour or less of useful operating time.
13. Power and Audio mute switch.
Set the switch in “on” position, the indicator lights for a moment. Put the switch in “mute”position.
Muting prevents the plop noise that sometimes occurs when turning the microphone off.
The LED will light red when the battery only has one hour or less of useful operating time.
14. Microphone gain adjustement.
Allows you to adjust the gain of the microphone and thus compensating soft or hard voices.
15. Battery compartment.
Acces the battery compartment by removing the cover.