DAPAudio COM-AR, Руководство пользователя

Страница: 8 / 12

7
COM-ART
Ordercode: D1414
Installation
Remove all packing materials from the COM-ART. Check if all foam and plastic padding is removed.
Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Power Supply
The COM-ART can be powered with an AA battery or be plugged into a mixer/power supply by means of
a USB cable.
Replace the Battery
01) Press and pull the battery cover to open the battery housing.
02) Insert an AA battery.
Note: Only use disposable batteries. It is not recommended to use rechargeable batteries.
03)
Replace the battery cover.
Fig. 03
Location
For best operation, the COM-AT (transmitter) and the COM-AR (receiver) should be:
 Located above the ground, as high as possible,
 Positioned away from walls or metal surfaces, to minimize reflections,
 The receiver antenna should be kept away from noise sources such as other digital equipment,
microwave ovens or other large metal objects. The device works best when the receivers are
located within the line of sight of the transmitter.