DAPAudio Cable Tester Pro, Руководство пользователя

Страница: 7 / 16

6
Cable Tester Pro
Ordercode: D1909
01) Speakon-8P Socket
02) Speakon-8P Socket
03) Cat 5- Socket
04) TRS-Jack 3,5 mm Socket
05) TRS-Jack 6,3 mm Socket
06) Phono (RCA) - Socket
07) Contact 1-8 indication LED
08) Din- 3P / 5P / 7P / 8P-aansluiting
09) Contact Selector
10) XLR / F-5P-connector
11) Banana Socket
12) XLR / F-3P- Socket
13) Speakon-4P- Socket
14) Cat 5- Socket
15) TRS-jack 6,3 mm-Socket
16) TRS-jack 3,5 mm- Socket
17) Phono (RCA) – Socket
18) Contact 1-8 indication LED
19) Din- 3P / 5P / 7P / 8P- Socket
20) Battery Check LED
21) XLR / M-5P- Socket
22) Banana Socket
23) XLR / M-3P- Socket
24) Speakon-4P Socket
25) GND-LED
26) Battery Compartment
Installation
Remove all packing materials from the Cable Tester Pro. Check that all foam and plastic padding is
removed. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Inserting/ Replacing the battery
Open the battery cover and remove it .
If replacing the battery, remove the old battery
from the battery compartment. Leaky or
damaged batteries might cause irritation to the
skin. When handling them you should use
protective gloves
.
Insert the battery and make sure the poles are
correct
.
Close the battery cover .
If the device is not used for a longer period of
time, remove the battery
.
Fig. 01