DAPAudio CA-4500, Руководство пользователя

Страница: 20 / 24

19
Ordercode: D4515
CA-4500
9.1. Workmode
In this menu, it is possible to choose the desired operation mode.
01)
The available modes are:
●
NORMAL: All 4 outputs function independently.
● CH12 BRI: Outputs 1 and 2 are bridged and outputs 3 and 4 function independently.
● CH34 BRI: Outputs 3 and 4 are bridged and outputs 1 and 2 function independently.
● CH12/34 BRI: Outputs 1 and 2 are bridged. Outputs 3 and 4 are bridged.
● LINK: Outputs 1-4 are linked. For example, if you adjust gain of the output 1, then gain of the
outputs 2, 3 and 4 will be adjusted automatically.
9.2. Pin
In this menu, it is possible to set the PIN code which will be needed to unlock the device upon start-up.
01)
Turn the menu control (03) to select one of the 3 options:
●
ON: The PIN code is needed upon start-up.
● OFF: No PIN code is needed upon start-up.
● EDIT: Edit the PIN code.
02) Press the menu control (03) to confirm your choice.
03) If you have chosen EDIT, you can start editing the PIN code. The display will show:
04) Turn the menu control (03) to select the desired character for the first digit. Press the menu control
(03) to confirm your choice.
05) Repeat step 4 in order to select characters for the second, third and fourth digit.
06) Once you have confirmed the fourth digit, the display will return to the previous menu.
9.3. Amp Stat
In this menu, it is possible to monitor the current status of the device. In normal conditions, the display
should read NORMAL.
9.4. Name
In this menu, it is possible to change the name of the device.
01)
The display will show:
02) Now you can change the device’s name (a maximum of 10 digits). Turn the menu control (03) to
select the desired character for the first digit. Press the menu control (03) to confirm your choice.
03) Repeat step 2 in order to select characters for the remaining 9 digits.
04) Once you have confirmed the tenth digit, the display will return to the previous menu.
9.5. Firmware
In this menu, it is possible to view the currently installed software’s version.
10. Exit
Press the menu control (03) to return to the gain adjustment menu (see Gain Adjustment, page 11).