DAPAudio BP-10 Beltpack, Руководство пользователя

Страница: 16 / 20

15
BP-10 Beltpack for PSS-106
Product code: D2622
Start-up
To operate the device:
Connect the headset, microphone or an instrument to the 4-pin connector IN (08).
Switch the PSS-106 on. Refer to the user manual of the PSS-106 for more information.
Switch the device on. See 5.1. Switching On/Off/Mute on page 11 for more information.
Pair the devices. See 5.4. Connecting to the Receiver on page 12 for more information.
Adjust volume on the PSS-106. Refer to the user manual of the PSS-106 for more information.
Adjust gain volume. See 5.5. Adjusting the Input Gain on page 13 for more information.
Speak into the headset, microphone or play the instrument.
6. Troubleshooting
This troubleshooting guide contains solutions to problems which can be carried out by an ordinary
person. The device does not contain user-serviceable parts.
Unauthorized modifications to the device will render the warranty void. Such modifications may result in
injuries and material damage.
Refer servicing to instructed or skilled persons. Contact your Highlite International dealer in case the
solution is not described in the table.
Problem Probable cause(s) Solution
The device does not
function at all
No power to the device
● Check if the device is switched on
● Make sure the batteries are inserted
properly
● Replace the batteries with new ones
No sound
Devices are not paired
● Check if the device and the PSS-106
are paired
Bad connections
● Check if the output connections
between the PSS-106 and external
equipment are correct
● Headset/microphone/instrument is not
connected to the device
Bursts of noise or other
audible signals
present
Sources of interference are present
● Identify potential sources of
interference (other RF-sources) and turn
them off
Momentary loss of
sound as the device is
moved around
performing area
Dead spots are present
● Reposition the PSS-106 and perform a
walk-through test again. If audible
drop-outs persist, mark the dead spots
and avoid them during performance