DAPAudio ASD-24, Руководство пользователя

Страница: 6 / 11

4
Description of the device
Features
The ASD-24 is a professional signal distributor:
• 1 pair In/ 4 pairs Out; 1 Mono In / 8 Mono Out
• Clip LED
• Adjustable Distributor Output Gain.
Overview
1. Power Switch
Use this button to switch your
Signal Distributor on.
Pay attention to the special POWER ON / OFF No Hum function, it won’t produce pulse strike to your
amplifier and speakers, when you switch ON / OFF the ASD-24. This practical function can effectively
protect your expensive amplifier and speakers in case of an error operation.
2. "POWER" Indicator
This indicator lights when the ASD-24 is switched on.
3. Mode Indication
This indicator shows the current mode of the ASD-24. Left light on, means it is working at 2-4 modes;
Right light on means it is working at 1-8 modes.
4. VU LEDs and Output Clip LED
Six bands LED –20dB, -10dB, 0dB, 10dB, 20dB and CLIP accurately show the current output level of the
ASD-24. The CLIP LED indicates whether the output signal is clipped or not. When the CLIP LED flashes
once in a while, indicating the signal is sometimes clipped. When the LED frequently flashes, the signal is
clipped often. You should reduce the input, to the point the LED is not flashing anymore.
5. Distributor Output Gain Adjust
This control allows you to adjust the output level, after the signal passed the distribution circuitry, from -
∞
to +12dB.
NOTE: Too much adjustment can distort the signal.