DAPAudio 800-D MKII, Руководство по эксплуатации продукта

Страница: 15 / 19

13
• 3) Turn the JOG dial
• Turn the jog dial clockwise during play to increase the BPM in the forward direction, counterclockwise
to decrease the BPM in the reverse direction. The faster you turn the wheel, the more BPM changes.
The BPM changes with a range of+/-16%.
• When you release jog wheel, the CD will return to the tempo indicated by the pitch slider.
12. Program Play
1. Press the PROGRAM button, the player will enter the program mode and the CD will stop rotating.
2. Select the desired track by pressing the SKIP button, then press the PROGRAM button again. The
selected track will be added to the program sequence.
3. Repeat step 2 operation. A maximum of 20 tracks can be programmed at one time.
4. Press the PLAY/PAUSE button to start the program play from the first selection.
5. Press the program button again during program play to stop playing.
6. Press and hold the program button more than 2 seconds to cancel the program mode and erase all
the current program contents.
13. Loop PLAY
1. Press the LOOP button to set the loop start point A, the LOOP indicator will flash on the LCD.
2. Press the LOOP button again to set the loop end point B, after the B point is set, the playback will
enter the loop play from A to B repeatedly.
3. Press the LOOP button again, the loop play function is canceled, the LOOP indicator goes out.
14. Relay Play
Press PROG and SGL button to switch the relay function. This indicator on the LCD track display will flash
when relay is on.
15. Fader Start
You have the possibility to start the respective CD-player directly from the mixer. Make sure that the Control
socket is connected with the respective socket on the mixer. Additionally the Audio socket has to be
connected with the Line-input sockets of your mixer. Please note that the Fader start function only works
with the appropriate mixers. Insert the CD and select the desired track. Start playback from your mixer.