Replacement for the Warmer-Heater
DW 101
02 . 50
DW101 - Glass
Take care so that water is not inflows to hot plate.
If water inflows to hot plate, breakdown occurs.
(Short circuit, Power breaker operation)
The electrical repair of your coffee maker should be left to
qualified personnel.
1. Separate power supply cord.
2. Rotate porcelain enamel plate to left. (Anticlockwise)
Porcelain enamel plate is separated.
3. Remove breakdown heater.
4. Make sure the new heater.
When you check the heater and joint part are difference,
you should be left to qualified personnel in this case.
5. Install heater.
Take care electric leakage so that is not done.
6. Rotate porcelain enamel plate to right (Clockwise).
This time, if these is any noise between heater and plate.
Stop turning.
7. Connect power supply cord, and confirm whether
heater operates normally.
