background image

R

www.danvex.fi

5

It may cause the fire or deformation of the 
housing.

SAFETY PRECAUTIONS

WARNING

 

Do not pull the power cord.

Do not apply an insecticide
or flammable spray.

Prior to the unit cleaning it should be
switched. Disconnect the power cord
from the electric mains.

It can cause the short circuit and lead the 
electric shock or fire.

Do not clean the unit with water.

It may cause the electric shock.

Since the fan rotates at high speed during 
operation, the cleaning of the operating unit 
may cause an injury.

If the unit is installed in the wet place,
provide its insulation against the
moisture ingress.

If the insulation against the 
moisture ingress isn't provided, 
it may cause the electric shock.

 

If not to do it, the dirt may collect in the unit 
and cause the fire.

When the unit is not going to be used for
a long time, disconnect it from the
electric mains.

Do  not

 

install  the  unit  where  there  is 

flammable gas.

Do not install the unit where its operation
is not safe.

Do not operate switches with wet hands.

It may cause the electric shock.

Don't try to install the unit by yourself.

If this is done incorrectly, it may cause the 
fire, electric shock, water leakage, etc.

Contact your local dealer.

Содержание DEH-600wp























Отзывы: