DanVex DEH-3K, Руководство пользователя

Страница: 13 / 19

A.General parameters
6.1.4
Parameters Setting
Filter max. working
time alarm,
disappear after reset
Current humidity
%
Current air speed,AC 3
speeds,EC 1~5 speed.
WIFI connection
established
WIFI connection not
established
ESP32 trigger
Defrost
Compressor relay
output active
- Compressor working
- Flashing when the
minimum absolute
humidity protection
is activated
Humidification
Timer
H05=1,temperature in
degrees Fahrenheit
F
H05=0,
temperature in
degrees Celsius
C
100% fresh air
Dehumidification mode
Cooling mode Heating mode
Mixed fresh and
return air
100% return air
6.1.5 Icon:
19 20
Air Damper :
Factory parameters setting:
Only for the available system working mode.
Filter :
Short press to set the available code;
Long p
ress
for 5 seconds to enter the factory parameters setting mode:the parameters code
R,P,O,H,C,A,D,F will appear;
Factory parameters setting:
Mode C hange :
Long p
ress
for 5 seconds to enter the factory parameters setting mode:the parameters code
R,P,O,H,C,A,D,F will appear;
Press or
to select the parameters code R,P,O,H,C,A,D,F;
Press to reduce humidity, press to raise humidity (1% changed each press)
.
Long p ress Short press & simultaneously for 5 seconds to display the run time,wait for 5 seconds to
exit ;
Short press to set the available code;
Press to open or close the air damper.
Short press & simultaneously to change the available system working mode.The temperature in the
top will flash,p ress to reduce temperature , press to raise temperature ( 0.5°C changed each press) .
Short press to exit without saving during the code value setting or return to the previous page;
Long press & & simultaneously for 3 seconds to reboot the controller ’ s setting;
Humidity Set :
ON/OFF:
Short press & simultaneously to change the available system working mode.
Press or t o select the parameters code R,P,O,H,C,A,D,F;
5 seconds without setting,the value will be saved and exit
Short press to save the code value;
Press to adjust the fan speed.
Short pressto to exit during parameters setting.
Fan S peed :
Long p ress for 10 seconds to clear the alarm and reset the time .
Short pressto turn on/off the controller:the small OFF appear in the top when the unit is powered off
and disappear after 3 minut ; es
B.Factory Parameters
Press or to adjust the code value;
10 seconds without setting,the value will not be saved and exit to the home screen.