DanVex DEH-1200i, Руководство по эксплуатации

Страница: 19 / 20

Warranty obligations
DanVex warrants that all the equipment parts will answer the technical requirements for 12
months from the date of delivery ( warranty period ) .
The warranty does not cover wearable parts such as filters. The warranty covers the defects in
workmanship
and materials
.
During the warranty period DanVex repairs and replaces the part having a defect of material or an
manufacturing error
.
DanVex completely fulfills its warranty obligations when it supplies the Customer a repaired or a
spare part.
Parts repair or replacement does not result in the warranty period extension .
The parts and components replaced under the warranty belong to DanVex .
DanVex or its distributor upon DanVex request has a right to inspect the defective parts and to
check the correctness of the warranty claim
.
Warranty repair execution conditions :
The damage occurred during the equipment normal operation . All recommendations and
instructions of the manufacturer concerning the equipment installation, operation and
maintenance were observed. Only original parts and materials were used for the equipment
maintenance and repair
.
R
www.danvex.fi
1
8
1.Where the above troubles cannot be fixed and repair is needed, please contact
supplieror distributor. Do not disassemble without authorization.
2.When the dehumidifier is in operation or stops, voice of circulating of refrigerating can
be heard. Such phenomenon is normal.
3.It is normal for the air outlet to drain hot air.
Instruction on Code of Failure
This dehumidifier is able to automatically judge failure. If there is any failure, there will be
failure code displayed on the humidity display window.
Controller error codes
Failure Display Problem
E1
Temperature sensor failure
E2 Humidity sensor failure
E3 Phase sequence failure (for 380V power supply devices only)
E4 Water tank full (for the devices equipped water tank only)
E5 High temp./pressure
E6 Low pressure alarm (leakage may happen inside)