DanVex DD Series, Руководство пользователя

Страница: 14 / 39

Page 14 of 39
3.11 Electrical connection
Be careful! All electrical connection works must meet local electrical equipment installation
standards, done by qualified professionals.
ƒ
It is forbidden to connect the power supply beyond the specified voltage and frequency;
ƒ
Before the connecting the power supply, the electrical point should be checked to ensure that
its voltage and frequency fluctuation does not go beyond ±10%;
ƒ
Unit must be grounded and turn off power during checking work.
3.12 Sensitive elements connection
The installation of temperature and humidity detection devices (controller) should follow the
requirements as below
˖
ƒ
Temperature and humidity detection devices should be installed above ground 1m - 1.5m, to
ensure the device can detect the humidity of the dehumidifying area;
ƒ
Detection device should be installed away from dry air or wet air or airflow from outside;
ƒ
Temperature and humidity detectors should stay away from cooling equipment,
ƒ
do not directly exposed to sunshine place, as the change of the temperature will affect the
actual assessment;
ƒ
External control system must be compatible with the low voltage control circuit of
dehumidification equipment.
3.13 Wiring Diagram: DanVex DD
Wiring diagrams the dehumidifier pasted on the body, and are available in the appendix of this
manual.
3.14 Wiring Diagram: DanVex DD-F
Wiring diagrams the dehumidifier pasted on the body, and are available in the appendix of this
manual.