16
Description of indicators, plugs and switches
Introduction
This section describes the indicators, plugs and switches with reference to the control
unit.
DanCon
All RBS 800 units are provided with a DanCon control panel.
Illustration
This drawing illustrates the control panel:
g
f
e
d
c
Part/function
This table gives you a description of each part on the control panel:
Part
Function
c
LED
The LEDs show the status and the alarm
Learn more about the status and alarms in the following
d
Occupied
By pressing this bottom the unit will go into the occupied mode.
Learn more about the occupied/service mode in section
“Comfort temperature during visit by technician”, page 14
e
Test
By pressing this button the unit will run through a quick test
program.
Any detected fail can be read on the fail LED, see more about
this in section “Test facility”, page 13
f
Dials
These dials give you the possibility of changing the heater
and/or the damper set points, see more in the section “Set
points”, page 12
g
RS485
communica-
tion port
These ports give you the possibility of connecting a pc and/or
DanLink telemonitoring program (accessory). See more about
this in section “Communications options”, page 15
Continued overleaf
