9
ENGLISH
Technical characteristics
Power supply
220/240
V (50 Hz)
Absorbed power
460
W
Absorbed current
2,6
A
Maximum humidity removed per 24 hours
9,6
litres
Volume of air dehumidified
210
m
3
/h
Coolant*
R22
Defrosting device
yes
Humidostat
yes
Dimensions (W x H x D)
570x400x300
mm
Weight (net)
26
Kg.
Capacity of canister
6
litres
Operating limits:
• temperature
12
°
- 32
°
C
• relative humidity
30 - 95
%
Standard operating conditions: 27
°
C - 60% RH
* R22 is a coolant which conforms to EEC environmental safety regulations.
A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug should be cut off from
the mains lead, and an appropriate plug fitted, as below.
WARNING: Very carefully dispose of the cut off plug after removing the fuse: do not insert in a 13 Amp socket elsewhere in the house as
this could cause a shock hazard.
With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse.
If the plug is a moulded-on typer, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362.
In the event of losing the fuse cover, the plug must NOT be based until a replacement fuse cover can be obtained from your nearest
electrical dealer. The colour of the correct replacement fuse cover is that as marked on the base of the plug.
B) If your appliance is not fitted with a plug, please follow the instructions provided below:
Read this instruction booklet carefully before installing and using the
appliance. In this way, you will obtain the best possible results and
maximum operating safety.
Presentation
The CD 400 Dehumidifier removes humidity from the air in the areas in which it is installed. The appliance is
compact and fitted with wheels and handles which facilitate its movement.
This appliance is recommended for all rooms in which excessive humidity is liable to build up, e.g. kitchens,
bathrooms, laundry rooms, cellars etc.
WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accordance with
the following code:
Green and yellow:
Earth
Blue:
Neutral
Brown:
Live
N
E
L
As the colours of the wires in the mains lead may not
correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The green and yellow wire must be connected to the terminal
in the plug marked with the letter E or the earth symbol
or coloured green or green and yellow.
The blue wire must be connected to the terminal marked with
the letter N or coloured black.
The brown wire must be connected to the terminal marked
with the letter L or coloured red.
Electrical connection (U.K. only)
