Dantherm Calorex AA300AVH, Инструкция для владельца и по установке

Страница: 33 / 36

One year manufacturer’s warranty is valid from the date of commissioning or
18 months from delivery, whichever is sooner.
Where commissioning is provided in the UK and Ireland, this must be carried
out by factory trained and approved personnel.
The following exclusions apply to the Warranty given by Dantherm Ltd. No
claims will be accepted if :
1. The heat pump is installed in any way that is not in accordance with the
current procedures as defined by Dantherm Ltd.
2. The heat pump has not been maintained in accordance with service
requirements in section 4.1 Regular Planned Maintenance.
3. The heat pump has been worked upon or is adjusted by anyone other
than a person authorised to do so by Dantherm Ltd.
4. The heat pump is incorrectly sized for the application.
5. The water flow through the machine is outside the specified limits.
6. The water pH level and/or chemical balance is outside the following limits:
7. The heat pump has suffered frost damage.
8. The electrical supply is insufficient or in any way incorrect.
9. The fan amps and duct pressure are outside the specified limits.
10. The air flow to and from the machine is outside the specified limits.
11. Corrosion is present due to poor air quality that has not been attended to.
If in doubt or if advice is required please contact the Dantherm Group
UK Service Department by calling 01621 856611 (option 4) or emailing
service.department@dantherm.com
Note: The Reply Paid Warranty Registration Card must be returned, to ensure
that the correct warranty is given. If you do not find a Registration Card with
your heat pump please contact the Dantherm Group UK Service Department
giving your name, address and serial number of your heat pump. A card will be
sent to you for completion.
Please give MODEL NUMBER and SERIAL NUMBER of your heat pump when
making technical or service enquiries. This will assist in correct diagnosis and
ensure service can be provided with the minimum delay.
6.0 WARRANTY CONDITIONS
Acidity pH pH 7.8 - 7.2
Total Alkalinity, as CaCO3 ppm 120 - 80
Total Hardness, as CaCO3 ppm 250 - 150
Total Dissolved Solids ppm 1000
Maximum Salt Content ppm 8000
Free Chlorine Range ppm Domestic 2 - 1
Free Chlorine Range ppm Commercial 6 - 3
Superchlorination max 30ppm for 24 hrs
Bromine ppm 5 - 2
Baquacil ppm 50 - 25
Ozone ppm Max 0.9
Maximum Copper Content ppm 1
Aquamatic Ionic Purifier ppm Max 2
33
SD611250 ISSUE 8