Page
11
of
33
The setup mode is protected by a 2 digit passcode. The passcode is 45 (the
numeric equivalent of GL). Just turn the volume/ setup knob until 45 is shown
on the screen and then push the knob to select.
9.
USB Update on side panel (Not pictured)
The USB connector is used for connected a PC to the device for loading
software updates.
10.
Network RJ45 on side panel (Not pictured)
The Neutrik Ethercon network socket can connect to both Neutrik Ethercons
and standard RJ45 cables. It is a 100M/bit standard IP network connection.
The status LED flashes to show when data is being correctly communicated
with the attached switch. This connector is the PoE source for the unit.