Dante DNA1990, Руководство по работе в сети

Страница: 43 / 112

38
Parameter Function
Protocol
You can select from the dropdown list such as PELCOP,
PELCOD.
2.3.1.2
Analog PTZ
The analog PTZ is shown as in Figure 2-31.
Figure 2-31
Please refer to the following sheet for detailed information.
Parameter Function
Address
It is to set the corresponding speed dome address. The default
setup is 1.
Baud rate It is to set the baud rate of the camera. The default setup is
9600.
PELCO D requires 2400 BAUD RATE
Data bit The default setup is 8.
Stop bit The default setup is 1.
Parity You can set protocol parity mode. The default setup is none.
2.3.2 Function
In this part, you can operate the PTZ of the camera and control PTZ movement.
Parameter Function
Preset Set camera preset.
Tour Set camera tour. Max 8 tours.
Scan Set camera scan.
Pattern Set camera pattern.
Privacy
mask
Set camera privacy mask setup.