-3-
-2-
Safe
Important preventive measure
When in the design of the equipment , it has been fully taken into
account for the safety of the individual factors ,but in correct use
may lead to electric shock and fire.for not to damage the security
of the internal parts of the monitor , please install , use and main-
tenance to comply with the following provisions . In addition , the
monitors are also subject to Indicated on a warning.
Monitor supply the external power, power supply boxes should be
placed in the best place of safety.
Please use the monitor with the power provided by external box.
damaged power supply box,go to the manufacturer or the nearest
authorized maintenance department to replace , can not change
the power supply arbitrary.
Overload the power outlet , power lines and damaged power plug
may endanger your safety and may lead to fire , please ask the
technical services department to replace.
* Machines internal are sophisticated devices,
no user
PD\
repair
the parts.
* When the Monitor external power supply box work abnormal,
please ask your dealer.
* the moment of close monitor, there are high voltage.
In order to avoid personal injury,
please observe the following rules:
* Unless there are security measures, please don't tilt the monitor
on the table.
* When you go out or leave room for a long time,close the external
power supply to ensure safety.
* Don't put water or other things into the machine in order to avoid
damage the machine.
*
Don't install the Annex which is designed specifically for the monitor.
*
Case of bad weather, thunderstorms or long idle time, please unplug
the external power supply.
* The monitor configuration for a dedicated power supply,no one shall be
arbitrarily replaced, so as not to damage the machine.
D
on't
let any object oppression or winding the external power supp
-ly box, not place the monitor and the external power supply box in
a place easily damaged
.
Not in close to water sources such as baths,washing machines,sw
-imming pools and wet places to sue monitors and external power
supply.
In order to prevent the monitor,external power supply damage,and
trigger a dangerous, should avoid the following situation:
* put monitor or power supply on the combustibles objects.
* office on the ventilation.
* put the monitor and external power box near heat source
Do not use a hard object friction active-matrix LCD, otherwise they
will be scratches or permanent damage LCD.
Do not push with your fingers a long time on LCD screen , or will
have afterglow
Screen may appear red and green and blue pixels of the Dead, but
it does not affect the day display.
If possible, make full use of the recommended resolution to obtain
the best results.If you use the recommended resolution of any
model may have abnormal screen, but it is a fixed-resolution LCD
panel characteristics.
Clean
* Clean the monitor before you turn off the monitor and an external
power supply.
* Use a soft cloth to clean the screen and the panel of dust,not dire
-ctly spray the aerosol in the monitor,or may cause electric shock.
Liquid flowing into the machine will be caused by short circuit
damage.
Important preventive measure
