2
[Attention]
Warning! 600W LED Follow Spot is used by professionals. Non-professionals do not
use it alone in case of danger.
The following unhealthy phenomenon will appear for improper use. The leakage of
case will appear for the bad connection between power and ground. The ultraviolet
rotation from the light source, the explosion of bulb and the poor lamp holder will cased the
falling of the body of light.
Reading the manual carefully before you turn on the power and installation the light.
Following all the safety precaution, following instruction and all the warning.
Prevent the electric shock.
Please cut the AC power when you replace bulb, fuse, any other parts and not in use.
Keeping good grounding state between power and ground wire.
Comply with the power stand of specification requirement and install the grounding
facilities that with overload protection device.
Prevent the attack by ultraviolet radiation and bulb explosion.
Don’t operate the moving head light that direct emit strong light don’t through optical
lens filter.
Turn off the power source and ensure the temperature of light not obviously higher
than environment temperature.
Don’t straight look at the bright mouth of light
Prevent from person burns or field on fire
Don’t make the directly short circuit between temperature control switch and fuse.
Renewal the detective temperature control switch or the fuse as the original type.
Keep the flammable materials (alcohol, gasoline, paper) away the light at least 1 meter.
In case to ignite other flammable object for the over temperature of light body.
It can’t close fire for long time in 1 meter. For the light not belong to non-combustible
materials.
Don’t put filter or other items on the three lens of the light.
The surface of the light will become hot after long time using. So you exchange the
bulb or other parts until it cooling to the room temperature.
Do not repair or installation the light by use of the accessories that not approved by the
original factory.
Do not use the light when the around temperature over 40 degrees.
Prevent the accident for the falling of the light
Do not raise the light alone
Don’t use the light hook and fixture that don’t meet the requirement of instruction
manual.
Set up barriers around the work area whenever you installation or take down the light
and prevent the non-operate enter.
