Danmeter CSM, Руководство по заправке, Страница: 10 / 11

CSM - Refill Manual Page 8
4
Refill the CSM
4.1
Refilling the CSM by Entering Session Code
Refilling in this way adds a number of sessions to the actual sessions left.
Session Codes can only be used once
Turn on the CSM (without patient cable).
If less than 10 sessions are left: Press Mute Key (5).
If any CSM link serial No. appears in the display, select cancel.
Follow the 4 steps as shown below:
-?-
-—–--CSI——-
BS% -?-
EMG% -?-
SQI% -?-
BAT 0:19:34
1
BS% -?- -?- CSI
Menu 3
Alarm
Config
Device information
2
Use the up/down arrows of the Control Key (9) to select the No./ letter of the
code.
Use right/left arrows of the Control Key (9) to go to next/previous No./letter.
When the Session code has been entered, exit the screen and accept the
Session Code by pressing the Control Key (9) to the right.
The following screen will appear:
!
BS% -?- -?- CSI
Code 1
Enter code
8 888.8888.8888.8888
ID: 1
16 x
4
BS% -?- -?- CSI
Device information 4
Link
Log
Code
3