DIS
User Manual
USER MANUAL AO 6004 REV B.DOCX
9
4.1.5
Normal operation
Powering up
4.1.5.1
Connect the AO unit(s) to the rest of the system via
the DCS-LAN connectors and connect the audio
outputs to the appropriate units (tape recorders,
infrared transmitters, etc.).
Switch on the power on the Central Unit.
During the initialization the AO unit will
automatically assign channels to the outputs. The unit
is immediately ready to use after start-up unless
other channels need to be assigned to the outputs or
the channel volume needs to be adjusted. These
adjustments can only be done using the SW 6000.
