2.
Prepare sealant (in the packaging box) along the entire perimeter of the plan, represented in the key with
letter “A”.
3.
Plug the appliance in the collection.
4.
Secure the appliance to the work by 4 brackets (in the packaging box), shown in the diagram with the letter
“B”.
Any deformities caused by incorrect installation could affect the performance of the appliance.
ELETTRICAL CONNECTION
The electrical connection for the hob and that of another appliance (oven , refrigerator, dishwasher, etc…) should be connected
separately for both security reasons and for any subsequent maintenance or whatever.
At the bottom the appliance has terminal for connecting to different types of power supply.
The appliance has a cord already connected and ready for connection of single phase.
Voltage (V)
Frequency (Hz)
Wire connection
220-240V 1+N
50-60Hz
Yellow/green
230-240V 1+N
50-60Hz
blu
N
brown
L
CABLE CONNECTION TI THE POWER SUPPLY
•
If the appliance is directly connected to the mains must be placed between the device and the network
switch with a minimum opening of 3 mm. This switch should be easily accessible after installation.
•
The outlet must be grounded and complies with applicable laws.
•
The socket is able to withstand both the maximum power that the voltage of the appliance (as shown on the
label).
•
The socket is compatible with the plug of the appliance, possibly replace the socket or the plug but never use
extensions or multiple.
•
The cable must not be bent or compressed
THE COMPANY DISCLAIMS ALL RESPONSIBILITY ' IF THESE REGULATIONS ARE NOT RESPECTED.
