P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PA G E 2 7
ADJUSTING THE BRACKET POSITION
Fix the hob on the work surface by screw 4 brackets on the bottom of hob (see picture) after
installation. Adjust the bracket position to suit for different table top thickness.
Cautions
1.
The induction hotplate must be installed by qualified personnel or technicians.
We have professionals at your service. Please never conduct the operation by yourself.
2.
The hob will not be installed directly above a dishwasher, fridge, freezer, washing machine
or clothes dryer, as the humidity may damage the hob electronics
3.
The induction hotplate shall be installed such that better heat radiation can be ensured to
enhance its reliability.
4.
The wall and induced heating zone above the table surface shall withstand heat.
5.
To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6.
A steam cleaner is not to be used.
WARNING:
Under any circumstances, the brackets cannot touch with the inner
surfaces of the worktop after installation (see picture).