2
Installation
The Dan W3-1 is for use on all types of lifejackets.
The Dan W3-1 is supplied with a fixing clip. The clip is intended to be placed
behind a strip of lifejacket material or reflective tape; the light is secured by
pressing it into the clip.
Light and fixing clip (part no.1950 for grey standard clip
, for 1” w part no. 1952
Clips 2
, for 2” webbing) separated to show material path
It is the responsibility of the lifejacket manufacturer to ensure that the light is
attached securely and is in the correct position on the lifejacket to provide
maximum visibility when the wearer is in the water.
Operation
The DAN W3-1 is switched on automatically when the cable sensor is immersed
in water and can be switched off by pressing the on/off button.
The light can also be activated and deactivated manually by pressing the on/off
button.
The sensor on the cable can be tested by a metal clip.
Figure depicts the Manual ON/OFF Button
Cable
Sensor
p/n. 1950
p/n. 1952
