In addition to the acces-sories shown, the lamp-housing may be sewn inposition and the batteryplaced in a pocket.
Testing and switch activation
The pull tag must havea direct pull and not bepulled at an angle.
3
Страница 1: ...o piece manually activated versatile light designed for rapid attachment to lifejackets using a variety of fixing methods Daniamant Limited Unit 3 The Admiral Park Airport Service Road Portsmouth UK PO3 5RQ Telephone 44 0 23 9267 5100 Facsimile 44 0 23 9267 5101 www daniamant com 51 7005 Issue 10 C6495 ...
Страница 2: ...y housing it is designed to allow testing without breaking the tamper seal If the unit is damaged or corrosion is visible the unit is to be replaced 3 Remove pull tag or toggle from LJ2 battery pack light should illuminate immediately If light fails to operate replace light and cable assembly with a checked unit If light operates replace toggle in battery pack test is complete After use Battery pa...
Страница 3: ...dition to the acces sories shown the lamp housing may be sewn in position and the battery placed in a pocket Testing and switch activation The pull tag must have a direct pull and not be pulled at an angle 3 ...
Страница 4: ...g Daniamant s lights are marked with the symbol below which conveys that this waste must be treated separately from household waste To ensure compliance with the WEEE and Battery Regulations the Survivor Lo cation Lights placed on the market in the UK or Denmark should be returned to Daniamant in the UK or Denmark or deposited in your nearest WEEE Designated Collection Facility operated by your Lo...
