2
Installation
The Dan W2 is for use on all types of lifejackets.
The Dan W2 is supplied with a fixing clip. The clip is intended to be placed behind
a strip of lifejacket material or reflective tape; the light is secured by pressing it
into the clip.
Light and Fixing clip separated to show material path.
It is the responsibility of the lifejacket manufacturer to ensure that the light is
attached securely and is in the correct position on the lifejacket to provide
maximum visibility when the wearer is in the water.
Operation
The DAN W2 is switched on automatically when the sensor is immersed in water;
no user action is required. The light can be turned off by rotating the dome anti
clockwise. The light can be reactivated by turning the dome clockwise.
Figure depicts the DAN W2 in the ON position.
ON
