3
Operation
The DAN ML3 is switched on by pressing the on/off button and can be
deactivated by pressing the button again.
Figure depicts the manual
‘ON/OFF button’.
Maintenance
Routine service
Dan ML3 is maintenance free, but the following checks must be made annually:
1. Inspect the light for signs of damage or corrosion.
2. Press the on/off button for and the light will commence flashing, then
press the button once more and the light should deactivate.
Replacement
The Dan ML3 lifejacket lights have a storage life of 5 years and must be replaced
by the date shown on the label.
Health and safety information
Dan ML3 lights contain Lithium cells. These must be handled correctly:
•
Do not dismantle the light assembly
•
Do not make any external electrical connection
•
Do not recharge
•
Do not incinerate
•
Store between -30°C and +65°C
ON/OFF
Button
