System 8700 User Manual
Rev 0.95
Page 5 of 32
1.
Introduction
Important safety information
This document may contain warnings:
GENERAL HAZARD
Indicates a potentially hazardous general situation. The keyword (DANGER,
WARNING, and CAUTION) indicates the hazard level.
ELECTRICITY
Indicates a potentially hazardous electrical situation. The keyword (DANGER,
WARNING, and CAUTION) indicates the hazard level.
MAGNETIC FIELD
Indicates a potentially hazardous magnetic field situation. The keyword
(DANGER, WARNING, and CAUTION) indicates the hazard level.
1.1.1.
General warnings
Please review the following safety precautions and all warning and caution information
throughout the manual.
WARNING!
This Magnet Power Supply (MPS) is intended for professional incorporation into
complete accelerator systems as a part of a fixed installation. If installed
incorrectly it may present a safety hazard. Close attention is required to system
design and electrical installation to avoid hazards in either normal operation or
in the event of equipment malfunction.
WARNING!
Do not perform any flash test or voltage withstand test on the Magnet Power
Supply. Any electrical measurements required must be carried out with power
supply disconnected.
CAUTION!
Only qualified electricians are allowed to install and maintain this equipment.
