15
For Days 1-5 (weekdays)
a) Press
PROG
until Event 1 fl ashes in
display (
Event 1, Days 1,2,3,4,5
).
b) Use
+ and –
buttons to alter time
(press and hold to change in 10 min
increments).
c) Use
and
buttons to alter the water
temperature in 0.5°C (1°F) steps.
d) Press
NEXT
to move to next preset time &
temperature (
Event 2
,
Days 1,2,3,4,5
).
e) Repeat steps b, c & d for programming
Events 3, 4, 5 & 6.
For Days 6-7 (weekends)
Press
PROG
until Event 1 fl ashes in
display (
Event 1 Days 6-7
).
Repeat steps b, c and d above to
programme time and temperature
events for the weekend.
Press
PROG
until the colon in the LCD display
starts to fl ash.
The unit is now in
RUN mode
and your
hot water will come on and go off at the
programmed times.
Proceed to page 16.
Programming in 5/2 day mode
(one set of programmes for weekdays, another set for weekends)
P
rogr
amming in 5/2-
da
y mode
