![background image](http://html1.mh-extra.com/html/danfoss/vlt/vlt_design-manual_3509564079.webp)
installed in a separate cabinet. Other ways of doing the
installation may have just as good an EMC performance,
provided the above guide lines to engineering practice are
followed.
If the installation is not carried out according to the
guideline and if unscreened cables and control wires are
used, some emission requirements are not complied with,
although the immunity requirements are fulfilled. See .
Illustration 5.31 EMC-correct Electrical Installation of a Frequency Converter in Cabinet.
How to Install
VLT
®
Refrigeration Drive Design Guide
78
MG16G102 - VLT
®
is a registered Danfoss trademark
5
5